Internet Tools (InfoMagic)/Internet Tools.iso/dos_win/winsock/maillist/94-05.Z/94-05/[e-mail]_Thu May 1 22:38:16 1994.msg

Internet Message Format | 1994-05-31 | 6KB

Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
          id AA24399; Mon, 2 May 1994 12:32:17 -0400
Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
          id AA27535; Mon, 2 May 1994 12:13:11 -0400
Received: from GATEWAY by bigblue with netnews
    for [e-mail] ([e-mail])
To: [e-mail]
Date: 2 May 1994 05:38:16 -0700
From: [e-mail] (Paul Smith)
Message-Id: <2q2s7o$[e-mail]>
Organization: CRL Dialup Internet Access    [phone]  [login: guest]
Sender: ses
Subject: Need SMC pktdrver(IRQs >10)

I need a packet driver that supports running the SMC Elite 16
(all three connector types) with IRQ's set to >10).

Crynmrs smc_wd.com only supports <10 IRQs.

I would be grateful if anyone would uuencode their SMC driver that
works on IRA >=10 and mails it to me.

Thanks.
From [e-mail] Mon May  2 12:32:21 1994
Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
          id AA24414; Mon, 2 May 1994 12:32:21 -0400
Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
          id AA15121; Mon, 2 May 1994 12:16:10 -0400
Received: from GATEWAY by bigblue with netnews
    for [e-mail] ([e-mail])
To: [e-mail]
Date: Sat, 30 Apr 1994 14:46:48
From: [e-mail] (Trent Stevens)
Message-Id: <[e-mail]>
Organization: UT Austin
Sender: ses
Subject: Cello and Chameleon?

Did anyone ever figure out why Cello and Chameleon could not work together?
Cello always GPF's when I try to run it with NetManage's sampler . . .

Trent Stevens  [e-mail]
From [e-mail] Thu May  1 22:01:44 1994
Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
          id AA24424; Mon, 2 May 1994 12:32:23 -0400
Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
          id AA11994; Mon, 2 May 1994 12:31:45 -0400
Received: from GATEWAY by bigblue with netnews
    for [e-mail] ([e-mail])
To: [e-mail]
Date: 1 May 1994 22:01:44 GMT
From: [e-mail] (Kenley Neufeld)
Message-Id: <2q18s8$[e-mail]>
Organization: University of San Francisco
Sender: ses
References: <2pqomh$[e-mail]>, <[e-mail]>
Subject: Re: WinQVT can be used with gopher?  was re: I'd pay for a good TELNET client for winsock


To use WinQVT with Mosaic, you must change the path for telnet and/or ftp in
the mosaic.ini file (should be in your windows directory).
From [e-mail] Thu May  1 22:33:13 1994
Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
          id AB24443; Mon, 2 May 1994 12:32:26 -0400
Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
          id AA27534; Mon, 2 May 1994 12:13:08 -0400
Received: from GATEWAY by bigblue with netnews
    for [e-mail] ([e-mail])
To: [e-mail]
Date: 2 May 1994 05:33:13 -0700
From: [e-mail] (Paul Smith)
Message-Id: <2q2ru9$[e-mail]>
Organization: CRL Dialup Internet Access    [phone]  [login: guest]
Sender: ses
References: <[e-mail]>
Subject: Re: wfwg 3.11, winsock, SMC-ethercard +elite16

Axel Kieser ([e-mail]) wrote:
: Hi, I think this is a question which was often answered before, but I haven't
: saved the answers and now I need a solution for my problem.

: I run WFWG 3.11 without network support and Trumpet-Winsock. I have a SMC
: EtherCard Plus Elite 16 and load the drivers wd8003e and winpkt.com before
: starting WFWG, no problems.
: What have I to do to get WFWG-networking and run winsock.dll, too?
: Please send me your protocol.ini-files and the important parts of system.ini
: and a short and easy description of what to do.

: Please answer by e-mail, too.

autoexec.bat - fragments
-------------------------

C:\WIN3\net start
lh c:\win3\pktmux 2 61 /b
REM could not get winpkt to work... if it would have, I might
REM been able to save alittle bit of low mem
REM lh c:\win3\winpkt 0x62 0x61
REM lh c:\win3\winpkt 0x63 0x61
lh c:\win3\pktdrv 62 61 /w10
lh c:\win3\pktdrv 63 61 /w10
set TZ=EDT8EDT
set WATTCP.CFG=c:\winnfs
c:\winnfs\nfsdrvr -s 2 -f 10 -d 3
c:\winnfs\mount -a
REM at this point; mem/d indicates that the max size prog I can run
REM is 514k.  After running WFWG 3.11 running a DOS session and running
REM mem/d again, the max size prog is 479k.  Gettting tighter and
REM tighter.  NOTE: some older windows/DOS progs are unreliable at this
REM amount of low mem.  Some (ABC flow charting) are execption faulting
REM for some of their menu picks/changing printer options...

system.ini fragments
--------------------

[network drivers]
netcard=exp16.dos
transport=ndishlp.sys,*netbeui,dis_pkt9.dos
devdir=C:\WIN3
LoadRMDrivers=Yes

protocol.ini fragments
----------------------


[network.setup]
version=0x3110
netcard=ms$ee16,1,MS$EE16,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,NETBEUI
lana0=ms$ee16,1,ms$netbeui
lana1=ms$ee16,1,ms$ndishlp

[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP

[MS$EE16]
DriverName=EXP16$
IRQ=10
IOADDRESS=0x350
IOCHRDY=Late
TRANSCEIVER=Thin Net (BNC/COAX)

[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=MS$EE16

[NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=MS$EE16
LANABASE=0

[pktdrv]
DriverName=PKTDRV$
bindings=MS$EE16
intvec=0x61
novell=no

...

: Thanks in Advance, Axel